Aruba SWITCHES 2540 Price in Dubai, UAE, Saudi Arabia, KSA, Africa and Russia

PHYSICAL INTERFACES

2540 24G 4SFP+ Switch (JL354A):

- 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 4 SFP+ 1/10GbE ports; PHY-less

2540 48G 4SFP+ Switch (JL355A):

- 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ 1/10GbE ports; PHY-less

2540 24G PoE+ 4SFP+ Switch (JL356A):

- 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ 1/10GbE ports; PHY-less

2540 48G PoE+ 4SFP+ Switch (JL357A):

- 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ 1/10GbE ports; PHY-less

ADDITIONAL PORTS AND SLOTS

1 dual-personality (RJ-45 or USB micro-B) serial console port

MEMORY AND PROCESSOR

Dual Core ARM Coretex A9 @ 1016 MHz, 1 GB DDR3 SDRAM
Packet buffer size: 12.38 MB 4.5 MB Ingress/7.785 MB Egress, 4 GB eMMC

DIMENSIONS

2540 24G 4SFP+ Switch (JL354A):

- (H) 4.39 cm x (W) 44.42 cm x (D) 20.02 cm (1.73” x 17.42” x 7.88”) (1U height)
- Weight: 5.31 lb (2.41kg)

2540 48G 4SFP+ Switch (JL355A):

- (H) 4.39 cm x (W) 44.42 cm x (D) 24.63 cm (1.73” x 17.42” x 9.7”) (1U height)
- Weight: 6.83 lb (3.10kg)

2540 24G PoE+ 4SFP+ Switch (JL356A):

- (H) 4.39 cm x (W) 44.42 cm x (D) 30.42 cm (1.73” x 17.42” x 11.98”) (1U height)
- Weight: 8.6 lb (3.90kg)

2540 48G PoE+ 4SFP+ Switch (JL357A):

- (H) 4.39 cm x (W) 44.42 cm x (D) 30.42 cm (1.73” x 17.42” x 11.98”) (1U height)
- Weight: 9.83 lb (4.46kg)

PERFORMANCE

1000 Mb Latency: < 3.8 µs (64-byte packets)

10 Gbps Latency: < 1.6 µs (64-byte packets)

Routing table size: 2,000 entries (IPv4), 1,000 entries (IPv6)

MAC address table size: 16,384 entries

2540 24G 4SFP+ Switch (JL354A), 2540 24G PoE+ 4SFP+ Switch (JL356A):

- Throughput: up to 95.2 Mpps
- Switching capacity: 128 Gbps

2540 48G 4SFP+ Switch (JL355A), 2540 48G PoE+ 4SFP+ Switch (JL357A):

- Throughput: up to 112.0 Mpps
- Switching capacity: 176 Gbps

ENVIRONMENTAL

Operating temperature range: 32°F to 113°F (0°C to 45°C); up to 5,000 Feet, -0°C to 40°C (32°F to 104°F) up to 10,000 Feet

Operating relative humidity: 15% to 95% @ 104°F (40°C), noncondensing

Storage temperature range: -40°C to 70°C (-40°F to 158°F)

Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C); up to 15,000 Feet

Nonoperating/Storage relative humidity :

- 2540 24G 4SFP+ Switch (JL354A), 2540 48G 4SFP+ Switch (JL355A): 15% to 95% @ 149°F (65°C), noncondensing
- 2540 24G PoE+ 4SFP+ Switch (JL356A), 2540 48G PoE+ 4SFP+ Switch (JL357A): 15% to 95% @ 149°F (65°C)

Acoustic: See data sheet

Airflow direction: Side-to-side

ELECTRICAL CHARACTERISTICS

Frequency: 50/60 Hz

80plus.org Certification:

- 2540 24G PoE+ 4SFP+ Switch (JL356A), 2540 48G PoE+ 4SFP+ Switch (JL357A): Silver

Voltage: See data sheet

Current: See data sheet

Maximum heat dissipation: See data sheet

Maximum power rating: See data sheet

Idle power:

- 2540 24G 4SFP+ Switch (JL354A), 2540 48G 4SFP+ Switch (JL355A): Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theo- retical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
- 2540 24G PoE+ 4SFP+ Switch (JL356A), 2540 48G PoE+ 4SFP+ Switch (JL357A): 370 W PoE+

PoE power:

- 2540 24G PoE+ 4SFP+ Switch (JL356A), 2540 48G PoE+ 4SFP+ Switch (JL357A): Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theo- retical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.