.svg)
JG722A Specification
JG722A Specifications |
|
| Type | HP 850 Unified Wired-WLAN Appliance |
| I/O ports and slots | · 8 dual-personality ports; 8 RJ-45 autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Duplex: 100BASE-TX: half or full; 1000BASE-T: full only Media type: Auto-MDIX SFP 100/1000 Mb/s ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
· 2 SFP+ 10GbE ports |
| Additional ports and slots | 1 RJ-45 serial console port
1 RJ-45 out-of-band management port |
| Power supplies | 2 power supply slots
1 minimum power supply required Includes: 1 x JG745A (HP X351 150 W 100 – 240 V a to 12 V dc power supply) |
| Memory and processor (Processor) | Broadcom XLP432 Eight core @ 1.4 GHz, 4GB flash, 4GB DDR3 SDRAM |
| Mounting and enclosure | EIA-standard 19-inch telco rack or equipment cabinet (hardware included) |
| Features | Default supported APs: 64
Maximum supported APs: 512 (via the optional purchase of the 32 or 128 access point E-LTU) Maximum supported clients and centralized throughput: 10,000 clients 10G centralized throughput Maximum supported users via local portal authentication: 2000 Maximum supported users via local authentication (AAA): 1,000 Maximum supported configured SSIDs: 512 Maximum supported ACLs: 32,000 Supported MSM APs are automatically discovered, Comware firmware is loaded, and the APs can be fully managed. AP upgrade license rules for redundant HP 850 Unified Wired-WLAN Appliance deployments The primary HP 850 Unified Wired-WLAN Appliance’s AP count must be increased using the optional HP Unified Wired-WLAN 128 AP E-LTU (JG649AAE) or the HP Unified Wired-WLAN 32 AP E-LTU (JG774AAE). The secondary HP 850 Unified Wired-WLAN Appliance’s AP count can be increased as needed using the reduced-cost HP Unified Wired-WLAN 128 AP Redundant E-LTU. The AC Power supplies are hot-swappable. |
| Dimensions (W x D x H) | 44 x 42 x 4.36 cm (17.32 x 16.54 x 1.72 in) (1U height) |
| Weight | 5.6 kg (12.35 lb) |
| Maximum heat dissipation | 576.03 kJ/hr (546 BTU/hr) |
| AC voltage | 100 – 240 V ac |
| DC voltage | -48 to -60 V dc |
| Maximum power rating | 150 W |
| Frequency | 50/60 Hz |
| Operating temperature | 0° to 45°C (32° to 113°F) |
| Operating relative humidity | 5% to 95%, noncondensing |
| Nonoperating/storage temperature | -40° to 70°C (-40° to 158°F) |
| Nonoperating/storage relative humidity | 5% to 95%, noncondensing |
| Altitude | Up to 5 km (16,404 ft) |
