.svg)
Q9H64A Specification
Q9H64A Specification |
|
| AP type | Indoor AP |
| IEEE | 802.11ax |
| Antennas Type | Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors
(due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz. |
| Supported frequency bands (country-specific restrictions apply) | 2.400 to 2.4835GHz
5.150 to 5.250GHz 5.250 to 5.350GHz 5.470 to 5.725GHz 5.725 to 5.850GHz |
| Wi-fi Radio | 5GHz radio:
– Four spatial stream Single User (SU) MIMO for up to 4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max) – Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) – Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max) – Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) 2.4GHz radio: – Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max) – Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to individual 2SS HE20 802.11ax client devices or to two 1SS HE20 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) |
| Supported data rates (Mbps) | – 802.11b: 1, 2, 5.5, 11
– 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 – 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) – 802.11n (5GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40) – 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160) – 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) – 802.11ax (5GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160) |
| Additional Interfaces | E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps)
– Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX – 2.5Gbps speed complies with NBase-T and 802.3bz specifications – POE-PD: 48Vdc (nominal) 802.3af/802.3at POE E1: 10/100/1000BASE-T Ethernet network interface (RJ-45) – Auto-sensing link speed and MDI/MDX Link aggregation (LACP) support between both network ports for redundancy and increased capacity DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length USB 2.0 host interface (Type A connector) – Capable of sourcing up to 1A / 5W to an attached device Bluetooth 5 and Zigbee (802.15.4) radio – Bluetooth: up to 8dBm transmit power (class 1) and -95dBm receive sensitivity – Zigbee: up to 8dBm transmit power and -97dBm receive sensitivity – Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.5dBi (AP-515) or 4.9dBi (AP-514) Visual indictors (two multi-color LEDs): for System and Radio status Reset button: factory reset, LED mode control (normal/off) Serial console interface (proprietary, micro-B USB physical jack) Kensington security slot |
| Maximum (worst-case) power consumption | – DC powered: 16W
– POE powered (802.3af, IPM enabled): 13.5W – POE powered (802.3at/bt): 20.8W – All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 5.7W (PoE powered) or 5.5W (DC powered). |
| Operating conditions | – Temperature: 0°C to +50°C / +32°F to +122°F
– Humidity: 5% to 93% non-condensing – AP is plenum rated for use in air-handling spaces – ETS 300 019 class 3.2 environments |
| Storage and transportation conditions | – Temperature: -40°C to +70°C / -40F to +158°F
– Humidity: 5% to 93% non-condensing – ETS 300 019 classes 1.2 and 2.3 environments |
