Poly REALPRESENCE IMMERSIVE STUDIO FLEX

SOLUTION COMPONENTS:

• • (3) 65” 4K UHD displays Aspect Ratio 16:9

• • (3) RealPresence® Group Series: (1) Group 700, (2) Group 500

• • (3) HD EagleEye IV cameras (1080p60)

• • (3)Digital Ceiling Microphone Arrays
  • 3-channel audio (5 speaker spatial audio + subwoofer)
  • (1) SoundStructure C16 audio processor

Lighting

• • Optional LED lighting fixtures (NA & EU only)

• • 10.1” Polycom® RealPresence Touch™

• • 55” 1080p display above people displays
  • Optional 70” Polycom Touch Display optimized for VisualBoard software

• • Media Wall – includes system electronics and stand (can be ordered stand-alone)
  • Wall façade (behind Media Wall)
  • Main Table
  • Back Wall (optional)
  • Rear Table (optional)

• • 6
  • 15 with Rear Table

REAR WALL DIMENSIONS

• • 6-Seat : 7 ft 7¼ in, 2.31 m
  • 15-Seat: 7 ft 7¼ in, 2.31 m

• • 6-Seat : 19 ft 4¼ in, 5.89 m
  • 15-Seat : 25 ft 9 5/8 in, 7.89 m

• • 6-Seat : 4 ft 1/8 in, 1.22 m
  • 15-Seat : 4 ft 11 ¾ in, 1.51 m

• • 6-Seat : 275 lbs
  • 15-Seat : 374.5 lbs

• • Table geometry designed to support 6 participants in a call or up to 13 participants out of an immersive telepresence call Optionally add an extra rear table to support an additional 9 participants

• • To further improve the video quality, this specially-designed lighting configuration optimizes participant illumination in a comfortable diffused manner, further enabling the immersive experience with matched near end and far end illumination. If you are providing your own lighting, Polycom recommends using a lighting designer and having the lighting professionally installed. Lighting specifications are included in the Room Preparation Guide.

• • Herman Miller Eames Executive
  • Steelcase Amia Task Chair

• • Arm span: 24.5” [62.23 cm]
  • Wheel base: 27” [68.58 cm]

MINIMUM ROOM DIMENSIONS

• • Width : 21 ft. (6.40 m)
  • Depth : 15 ft. 3 in. (4.65 m)
  • Height : 8 ft. (2.44 m)

• • Width : 21 ft. 10 in. (6.65 m)
  • Depth : 16 ft. 1 in. (4.90 m)
  • Height : 8 ft. (2.44 m)

• • Width : 26 ft. 47/8 in. (8.05 m)
  • Depth : 21 ft. 3 in. (6.48 m)
  • Height : 8 ft. (2.44 m)

INTEROPERABILITY

• • H.264 AVC, H.264 High Profile, RTV
  • H.263 & H.264
  • H.239
  • Binary Floor Control Protocol (BFCP)
  • LPR (Lost Packet Recovery)
  • AES Media Encryption

• • Video codec- Baseline, High Profile (HiP)
  • Video Error Concealment
  • People + Content
  • Content sharing via SIP
  • Video Error Concealment to preserve video quality during packet loss events
  • For secure video/audio and content

• • G.719 (3-channel audio)
  • Siren™ 22
  • Siren™ LPR (Lost Packet Recovery)
  • G722.1 Annex C
  • G.722, G.722.1
  • G.711

• • 22kHz bandwidth
  • 22kHz bandwidth with StereoSurround™
  • Siren LPR preserves audio quality during high packet loss
  • 14kHz bandwidth with Polycom Siren 14
  • 7kHz bandwidth
  • 3.4kHz bandwidth

• • Dual Stack H.323/SIP
  • Native integration with Microsoft Skype for Business and Lync 2013
  • TIP Support
  • Allows for flexibility for UC environments with H.323 video based networks and the SIP call control platform
  • Unified communication platform (presence, IM, voice and video). RDP support for Skype for Business content receive.
  • Allows for interoperability with legacy Cisco telepresence

CONTENT

• • (1) 55” 1080p HD LCD w/LED backlight

• • People Displays – 1080p upscaled to 4K UHD
  • Content Display: Full HD (1920×1080)

• • (1) Analog laptop interface – VGA with 3.5 mm audio connector (main table)
  • (1) Digital laptop interface – HDMI with audio embedded (main table) (DisplayPort available with customer supplied adapter)
  • Wireless: People+Content IP, Polycom® RealPresence® Desktop or Polycom® RealPresence® Mobile

• • Place content on the people displays, either one or all. Also supports moving people to content screen (55” display) while people display is used for content.

• • 5–60 fps (up to 1080p resolution at 60 fps)

• • HD (1920 x 1080i)
  • HD (1920 x 1080p)
  • WSXGA+ (1680 x 1050)
  • UXGA (1600 x 1200)
  • SXGA (1280 x 1024)
  • WXGA (1280 x 768)
  • HD (1280 x720p), XGA (1024 x 768)
  • SVGA (800 x 600)

• • HD (1920 x 1080)
  • WSXGA+ (1680 x 1050)
  • SXGA+ (1400 x 1050)
  • SXGA (1280 x 1024)
  • HD (1280 x 720)
  • XGA (1024 x 768)
  • VGA (640 x 480)

DIRECTORY AND MANAGEMENT SUPPORT

• • Configure local directory for sites without RealPresence® Resource Manager directory integration or for situations where entry on the RealPresence Resource Manager directory is not utilized. Create up to 2,000 contacts in Favorites locally.

• • Directory Services, provisioning, soft updates and system monitoring

• • Directory Services, device monitoring and provisioning

• • Call Management, Call Server and Gatekeeper functionality

• • Support for up to 200 contacts with presence

MULTIPOINT CONFERENCING

• • Room Continuous Presence: In this standard mode, the multipoint layout will automatically be generated. All participants will be shown on the displays. The layout will be determined either by following the general principles of Polycom Immersive Telepresence multipoint or fit a custom-set view configured by the conference administrator.
  • Voice Activated Room Switching (VARS): VARS is different from the standard Room Continuous Presence mode in that the speaker’s site is the only site seen by others. The view of the speaker’s site is sized to be as large as possible on all of the other participants’ displays. The current speaker sees the previous speaker’s site (i.e., the speaker’s layout remains unchanged). Layouts used in VARS are not customizable.
  • Active Speaker Priority (ASP): ASP mode allocates full screen real-estate to endpoints that have speaking participants. Non speaking endpoints are put in a “film-strip” in the bottom center of each display. Each film-strip can accommodate five endpoints. Note that Immersive Telepresence rooms require a frame for each codec.

BANDWIDTH

The recommended bandwidth required depends on the customer’s application, location, required resolution and other factors. Please refer to the RealPresence® Group Series Administrator’s Guide for a detailed matrix of call speeds and resolutions. Numbers are for People and Content being shared simultaneously.

• • 1080p60 High Profile
  • 1080p30 High Profile
  • 720p60 High Profile

• • 5.3 Mbps per suite
  • 3.1 Mbps per suite
  • 2.5 Mbps per suite

• • 9 Mbps per suite
  • 5.5 Mbps per suite
  • 4.5 Mbps per suite

• • 18 Mbps per suite
  • 18 Mbps per suite
  • 18 Mbps per suite

*Minimum network requirement may not provide an end-to-end max frame rate / highest resolution experience. **Other network conditions may require additional bandwidth beyond what is recommended.

LAN CONNECTION REQUIREMENTS

• The customer must provide 10 sequential static IP addresses. These will be used for the Codecs, Content monitor, SoundStructure(s), Terminal Server, Display Matrix, and RealPresence Touch. A 24-port unmanaged Ethernet switch is supplied with the system. This may be replaced with a customer-preferred device of the same capacity. If an in-room switch is used, only one LAN connection on the front wall is required.

ENVIRONMENTAL CONDITIONS

• Conference room operating temperature: 41-82° F, 5-28° C
• Relative humidity: 20% to 90% (non-condensing)
• Ambient Noise Level: 40 dBA or lower
• Recommended NC rating: NC18 to NC25