.svg)
Output
Max Configurable Power (Watts)
280 Watts / 450VA
Output Voltage Distortion
Less than 5 % at full load
Output Frequency (sync to mains)
47 – 53 Hz For 50 Hz nominal Sync to mains, 57 – 63 Hz For 60 Hz nominal Sync to mains
Topology
Line interactive
Waveform type
Stepped approximation to a sinewave
Transfer Time
4 ms typical : 8 ms maximum
Input
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 – 302 Adjustable, 195 – 265V
Batteries & Runtime
Battery type
Lead-acid battery
Typical recharge time
5hour(s)
Replacement Battery
RBC18
Expected Battery Life (years)
3 – 5
RBC Quantity
1
Battery Charge Power (Watts)
22 Watts
Runtime
Communications & Management
Interface Port(s)
DB-9 RS-232
Control panel
LED status display with on line : on battery : replace battery and overload indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO)
Optional
Surge Protection and Filtering
Surge energy rating
320Joules
Data Line Protection
RJ11 2-Way Modem/Fax/DSL splitter with protection (four wire dual lines), RJ45 10/100 Base-T Ethernet protection
Filtering
Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height
44MM, 4.4CM
Maximum Width
432MM, 43.2CM
Maximum Depth
383MM, 38.3CM
Net Weight
10.18KG
Shipping weight
11.73KG
Shipping Height
164MM, 16.4CM
Shipping Width
476MM, 47.6CM
Shipping Depth
589MM, 58.9CM
Color
Grey
Units per Pallet
24.0
Environmental
Operating Temperature
0 – 40 °C
Operating Relative Humidity
0 – 95 %
Operating Elevation
0 – 3048meters
Storage Temperature
-15 – 45 °C
Storage Relative Humidity
0 – 95 %
Storage Elevation
0 – 15240meters
Audible noise at 1 meter from surface of unit
38.0dBA
Online thermal dissipation
38.0BTU/hr
Conformance
Approvals
C-Tick, CE, EAC, GOST, TISI, VDE
Standard warranty
2 years repair or replace
Sustainable Offer Status
RoHS
Compliant
PEP
Available in Documentation tab
EOLI
Available in Documentation tab
