Cisco Wireless APs & Controllers Cisco Catalyst 9105AX Series Price in Dubai, UAE, Saudi Arabia, KSA, Africa and Russia

Cisco Catalyst 9105AX Series

The Cisco^® Catalyst^® 9105 Series Access Points are the most versatile next generation access point in enterprise grade. They are resilient, secure, and intelligent.

Add to quote

Product specifications

Item	Specification
Part numbers	Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas ● C9105AXI-x: Cisco Catalyst 9105 Series Cisco Catalyst 9105AX Access Point: Wall Plate, with internal antennas ● C9105AXW-x: Cisco Catalyst 9105 Series Cisco Catalyst 9105AX Teleworker Access Point: Indoor environments, with internal antennas ● C9105AXIT-x: Cisco Catalyst 9105 Series Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.
Software	Catalyst 9105 AXI ● Cisco Unified Wireless Network Software Release 8.10.MR3 or later ● Cisco IOS ^® XE Software Release 17.3.1, or later Catalyst 9105AXW ● Cisco Unified Wireless Network Software Release 8.10MR3 or later ● Cisco IOS ^® XE Software Release 17.3.1 or later
Supported wireless LAN controllers	● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities	● 2×2 MIMO with two spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac	● 2×2 downlink MU-MIMO with two spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80- MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
802.11ax	● 2×2 uplink/downlink MU-MIMO with two spatial streams ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80- channels ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support ● WPA3 support
Integrated antenna	Catalyst 9105AXW ● 2.4 GHz: Peak gain 3 dBi, internal antenna ● 5 GHz: Peak gain 5 dBi, internal antenna Catalyst 9105AXI ● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Interfaces	Catalyst 9105AXW ● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface ● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget) ● Management console port (RJ-45) ● USB 2.0 at 4.5W ● Passthru Port Catalyst 9105AXI ● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface ● Management console port (RJ-45)
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting brackets): ◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm) ◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)
Weight	Cisco Catalyst 9105AXW ● 0.8 lb. (373.2g) Cisco Catalyst 9105AXI ● 0.7 lb. (329.5g)
Input power requirements	● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ^®) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
	Catalyst 9105AXI
	PoE power		2.4-GHz radio				5-GHz radio			Link speed
	802.3af (PoE)		2×2				2×2			1G
	Catalyst 9105AXW
	PoE power		2.4-GHz radio		5-GHz radio		Link speed	USB		LAN1 PSE
	802.3af (PoE)		2×2		2×2		2.5G mGig	Disabled		Disabled
	802.3at (PoE+)		2×2		2×2		2.5G mGig	Either USB or LAN1 PSE enabled.
Environmental	Cisco Catalyst 9105AXW ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft (3000 m) Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2×2 to 1×1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled. Cisco Catalyst 9105AXI ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft.(3000 m) Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2×2 to 1×1 on the 2.4 GHz radio.
Available transmit power settings (Max/Min)	● 2.4 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)					● 5 GHz ◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW)
Regulatory domains	Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country
Compliance	● Safety: ◦ IEC 60950-1 ◦ EN 60950-1 ◦ UL 60950-1 ◦ IEC 62368-1 ◦ EN 62368-1 ◦ UL/CUL 62368 – 1 ◦ CAN/CSA-C22.2 No. 60950-1 ◦ AS/NZS60950.1 ◦ UL 2043 – Only for C9105AXI ◦ Class III equipment ● Emissions: ◦ CISPR 32 (rev. 2015) ◦ EN 55032 (rev. 2012/AC:2013) ◦ EN 55032 (rev. 2015) ◦ EN61000-3-2 (rev. 2014) ◦ EN61000-3-3 (rev. 2013) ◦ KN61000-3-2 ◦ KN61000-3-3 ◦ AS/NZS CISPR 32 Class B (rev. 2015) ◦ 47 CFR FCC Part 15B ◦ ICES-003 (rev. 2016 Issue 6, Class B) ◦ VCCI-CISPR 32 ◦ CNS (rev. 13438) ◦ KN-32 ◦ QCVN 118:2018/BTTTT ● Immunity: ◦ CISPR 24 (rev. 2010) ◦ EN 55024 + AMD 1 (rev. 2010) ◦ EN 55035: 2017 ◦ KN35 ● Emissions and immunity: ◦ EN 301 489-1 (v2.1.1 2017-02) ◦ EN 301 489-17 (v3.1.1 2017-02) ◦ QCVN (18:2014) ◦ QCVN 112:2017/BTTTT ◦ KN 489-1 ◦ KN 489-17 ◦ EN 60601-1-2:2015 ◦ EN 61000-6-1: 2007					● Radio: ◦ EN 300 328 (v2.1.1) ◦ EN 301 893 (v2.1.1) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ China regulations SRRC ◦ LP0002 (rev 2018.1.10) ◦ Japan Std. 33a, Std. 66, and Std. 71 ● RF safety: ◦ EN 50385 (rev. Aug 2002) ◦ ARPANSA ◦ AS/NZS 2772 (rev. 2016) ◦ EN 62209-1 (rev. 2016) ◦ EN 62209-2 (rev. 2010) ◦ 47 CFR Part 1.1310 and 2.1091 ◦ RSS-102 ● IEEE standards: ◦ IEEE 802.3 ◦ IEEE 802.3ab ◦ IEEE 802.3af/at ◦ IEEE 802.11a/b/g/n/ac/ax ◦ IEEE 802.11h, 802.11d ● Security: ◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA3 ◦ 802.1X ◦ Advanced Encryption Standard (AES) ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM)
Datarate/Transmit Power/ Receive sensitivity	● For information about Datarate, Transmit power and Receive Sensitivity
Transmit power and receive sensitivity
				5 GHz Radio				2.4 GHz Radio
	Spatial streams	Number of active antennas		Total TX power (dBm)			RX sensitivity (dBm)	Total TX power (dBm)	RX sensitivity (dBm)
802.11/11b
1 Mbps	1	2		–			–	20	-99
11 Mbps	1	2		–			–	20	-91
802.11a/g
6 Mbps	1	2		20			-97	20	-93
24 Mbps	1	2		20			-89	20	-86
54 Mbps	1	2		20			-80	20	-78
802.11n HT20
MCS0	1	2		20			-96	20	-93
MCS15	2	2		20			-75	20	-73
802.11n HT40
MCS0	1	2		20			-93	–	–
MCS15	2	2		20			-72	–	–
802.11ac VHT20
MCS0	1	2		20			-96	–	–
MCS8	1	2		20			-74	–	–
MCS0	2	2		20			-94	–	–
MCS8	2	2		20			-71	–	–
MCS9	2	2		–			–	–	–
802.11ac VHT40
MCS0	1	2		20			-93	–	–
MCS9	1	2		20			-69	–	–
MCS0	2	2		20			-91	–	–
MCS9	2	2		20			-66	–	–
802.11ac VHT80
MCS0	1	2		20			-90	–	–
MCS9	1	2		20			-66	–	–
MCS0	2	2		20			-88	–	–
MCS9	2	2		20			-63	–	–
802.11ax HE20
MCS0	1	2		20			-96	20	-93
MCS11	1	2		19			-66	19	-64
MCS0	2	2		20			-95	20	-91
MCS11	2	2		19			-65	19	-63
802.11ax HE40
MCS0	1	2		20			-93	–	–
MCS11	1	2		19			-63	–	–
MCS0	2	2		20			-92	–	–
MCS11	2	2		19			-62	–	–
802.11ax HE80
MCS0	1	2		20			-90	–	–
MCS11	1	2		19			-60	–	–
MCS0	2	2		20			-89	–	–
MCS11	2	2		19			-59	–	–

Feature	Benefits
Cisco DNA Spaces Indoor IoT Services	This industry-first indoor IoT-as-a-service offering will help customers deploy IoT devices and applications easily, rapidly, at scale, and at a significantly lower TCO. Indoor IoT Services works with the Catalyst 9100 access points to enable customers to deploy a broad spectrum of BLE tags, beacons, and other sensors, expanding use cases including asset management, environmental monitoring, wayfinding, and more.
Wi-Fi 6 (802.11ax)	The IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. Wi-Fi 6 is designed to use both the 2.4-GHz and 5-GHz bands, unlike the 802.11ac standard.
Uplink/downlink OFDMA	OFDMA-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.
Downlink MU‑MIMO technology	Supporting two spatial streams, MU-MIMO enables access points to split spatial streams between client devices to maximize throughput.
BSS coloring	Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.
Target Wake Time	A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point. This offers significant energy savings for battery-operated devices, up to 3x to 4x the savings achieved by 802.11n and 802.11ac.
Intelligent Capture	Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis. The software can track more than 240 anomalies and instantaneously review all packets on demand, emulating the onsite network administrator. Intelligent Capture allows for more informed decisions on your wireless networks.
Application Hosting on Catalyst 9100 Access	Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks. Utilizing the USB interface, containerized applications and hardware modules can be deployed to reduce cost and complexity. Adding Cisco DNA Center provides workflows and deployment-wide application lifecycle management.
Bluetooth 5	Integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, way finding or analytics.
Container support for applications	Container support enables edge computing capabilities for IoT applications on the host access point.
Apple features	Apple and Cisco have partnered to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies. Using new features in Apple iOS, in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications. At the center of the collaboration is a unique handshake between the Cisco WLAN and Apple devices. This handshake enables the Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, the Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. This feature is also known as Fast Lane.