Cisco Wireless APs & Controllers Cisco Catalyst 9115 Series Wi-Fi 6 Price in Dubai, UAE, Saudi Arabia, KSA, Africa and Russia

Cisco Catalyst 9115 Series Wi-Fi 6

The Cisco^® Catalyst^® 9115 Series with Wi-Fi 6is the next generation of enterprise access points. They are resilient, secure, and intelligent.

Add to quote

Product specifications

Table 2. Specifications

Item		Specification
Part numbers		Cisco Catalyst 9115AXI Access Point: Indoor environments, with internal antennas ● C9115AXI-x: Cisco Catalyst 9115 Series Cisco Catalyst 9115AXE Access Point: Indoor, challenging environments, with external antennas ● C9115AXE-x: Cisco Catalyst 9115 Series Cisco Catalyst 9115AXI Access Point: Indoor environments, with internal antennas, with embedded wireless controller ● C9115AXI-EWC-x: Cisco Catalyst 9115 Series Cisco Catalyst 9115AXE Access Point: Indoor, challenging environments, with external antennas, with embedded wireless controller ● C9115AXE-EWC-x: Cisco Catalyst 9115 Series Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.
Software		● Cisco Unified Wireless Network Software Release 8.9 or later ● Cisco IOS ^® XE Software Release 16.11 or later
Supported wireless LAN controllers		● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities		● 4×4 MIMO with four spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
802.11ac		● 4×4 downlink MU-MIMO with four spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support
802.11ax		● 4×4 downlink MU-MIMO with four spatial streams ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support
Integrated antenna		● 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
External antenna (sold separately)		● Cisco Catalyst 9115E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) ● Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
Interfaces		● 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz ● Management console port (RJ-45) ● USB 2.0 (enabled via future software)
Indicators		● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)		● Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)
Weight		Cisco Catalyst 9115AXI ● 1.98 lb (0.9 kg) Cisco Catalyst 9115AXE ● 2.43 lb (1.1 kg)
Input power requirements		● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ^®) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off.
Power draw		802.3at full feature – Catalyst 9115I
		Power source	Power type	2.4-GHz radio	5-GHz radio		Link speed		USB	LLDP
		802.3at	PoE	4×4	4×4		2.5G		Y	20.4W
		802.3at full feature – Catalyst 9115E
		Power source	Power type	2.4-GHz radio	5-GHz radio		Link speed		USB	LLDP
		802.3at	PoE	4×4	4×4		2.5G		Y	21.4W
		802.3af reduced feature
		Power source	Power type	2.4-GHz radio	5-GHz radio		Link speed		USB	LLDP
		802.3af	PoE	2×2	2×2		1G		N	13W
		Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues.
Environmental		Cisco Catalyst 9115AXI ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft. Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4×4 to 2×2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: -4° to 122°F (-20° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft.
System memory		● 2048 MB DRAM ● 1024 MB flash
Warranty		Limited lifetime hardware warranty
Available transmit power settings		2.4 GHz ● 23 dBm (200 mW) ● -4dBm (0.39mW)				5 GHz ● 23 dBm (200 mW) ● -4dBm (0.39mW)
Regulatory domains		Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country
Compliance standards		● Safety: ◦ IEC 60950-1 ◦ EN 60950-1 ◦ UL 60950-1 ◦ CAN/CSA-C22.2 No. 60950-1 ◦ AS/NZS 60950-1 ◦ UL 2043 ◦ Class III equipment ● Emissions: ◦ CISPR 32 (rev. 2015) ◦ EN 55032 (rev. 2012/AC:2013) ◦ EN 55032 (rev. 2015) ◦ EN61000-3-2 (rev. 2014) ◦ EN61000-3-3 (rev. 2013) ◦ KN61000-3-2 ◦ KN61000-3-3 ◦ AS/NZS CISPR 32 Class B (rev. 2015) ◦ 47 CFR FCC Part 15B ◦ ICES-003 (rev. 2016 Issue 6, Class B) ◦ VCCI (V3) ◦ CNS (rev. 13438) ◦ KN-32 ◦ TCVN 7189 (rev. 2009) ● Immunity: ◦ CISPR 24 (rev. 2010) ◦ EN 55024/EN 55035 (rev. 2010) ● Emissions and immunity: ◦ EN 301 489-1 (v2.1.1 2017-02) ◦ EN 301 489-17 (v3.1.1 2017-02) ◦ QCVN (18:2014) ◦ KN 489-1 ◦ KN 489-17 ◦ EN 60601 (1-1:2015) ● Radio: ◦ EN 300 328 (v2.1.1)					◦ EN 301 893 (v2.1.1) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ China regulations SRRC ◦ LP0002 (rev 2018.1.10) ◦ Japan Std. 33a, Std. 66, and Std. 71 ● RF safety: ◦ EN 50385 (rev. Aug 2002) ◦ ARPANSA ◦ AS/NZS 2772 (rev. 2016) ◦ EN 62209-1 (rev. 2016) ◦ EN 62209-2 (rev. 2010) ◦ 47 CFR Part 1.1310 and 2.1091 ◦ RSS-102 ● IEEE standards: ◦ IEEE 802.3 ◦ IEEE 802.3ab ◦ IEEE 802.3af/at ◦ IEEE 802.11 a/b/g/n/ac/ax ◦ IEEE 802.11h, 802.11d ● Security: ◦ 802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA ◦ 802.1X ◦ Advanced Encryption Standard (AES) ● Extensible Authentication Protocol (EAP) types: ◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2) ◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM)
Datarate/Transmit Power/ Receive sensitivity		For more detailed information about Datarate/TX Power/Receive sensitivity
Transmit power and receive sensitivity
		5-GHz radio				2.4-GHz radio
	Spatial streams	Total transmit power (dBm)			Receive sensitivity (dBm)	Total transmit power (dBm)		Receive sensitivity (dBm)
802.11/11b
1 Mbps	1	–			–	23		-98
11 Mbps	1	–			–	23		-90
802.11a/g
6 Mbps	1	23			-96	23		-95
24 Mbps	1	23			-87	23		-85
54 Mbps	1	23			-76	23		-76
802.11n HT20
MCS0	1	23			-95	23		-94
MCS31	4	23			-70	23		-70
802.11n HT40
MCS0	1	23			-93	–		–
MCS31	4	23			-68	–		–
802.11ac VHT20
MCS0	1	23			-95	–		–
MCS9	1	22			NA	–		–
MCS0	2	23			-92	–		–
MCS9	2	22			NA	–		–
MCS0	3	23			-91	–		–
MCS9	3	22			-67	–		–
MCS0	4	23			-90	–		–
MCS9	4	22			-66	–		–
802.11ac VHT40
MCS0	1	23			-89	–		–
MCS9	1	22			-65	–		–
MCS0	2	23			-86	–		–
MCS9	2	22			-62	–		–
MCS0	3	23			-85	–		–
MCS9	3	22			-61	–		–
MCS0	4	23			-84	–		–
MCS9	4	22			-59	–		–
802.11ac VHT80
MCS0	1	23			-84	–		–
MCS9	1	22			-60	–		–
MCS0	2	23			-81	–		–
MCS9	2	22			-57	–		–
MCS0	3	23			-80	–		–
MCS9	3	22			-55	–		–
MCS0	4	23			-77	–		–
MCS9	4	22			-54	–		–
802.11ac VHT160
MCS0	1	23			-84	–		–
MCS9	1	21			-59	–		–
MCS0	2	23			-85	–		–
MCS9	2	21			-57	–		–
MCS0	3	23			-85	–		–
MCS9	3	21			-55	–		–
MCS0	4	23			-85	–		–
MCS9	4	21			-53	–		–
802.11ax VHT20
MCS0	1	23			-94	23		-93
MCS11	1	21			-64	20		-62
MCS0	2	23			-91	23		-90
MCS11	2	21			-61	20		-59
MCS0	3	23			-90	23		-88
MCS11	3	21			-60	20		-58
MCS0	4	23			-87	23		-86
MCS11	4	21			-59	20		-57
802.11ax VHT40
MCS0	1	23			-92	23		-91
MCS11	1	21			-60	20		-60
MCS0	2	23			-89	23		-87
MCS11	2	21			-57	20		-57
MCS0	3	23			-88	23		-85
MCS11	3	21			-56	20		-55
MCS0	4	23			-86	23		-83
MCS11	4	21			-54	20		-54
802.11ax VHT80
MCS0	1	23			-87	–		–
MCS11	1	21			-58	–		–
MCS0	2	23			-84	–		–
MCS11	2	21			-55	–		–
MCS0	3	23			-83	–		–
MCS11	3	21			-54	–		–
MCS0	4	23			-81	–		–
MCS11	4	21			-52	–		–
802.11ax VHT160
MCS0	1	23			-84	–		–
MCS11	1	20			-55	–		–
MCS0	2	23			-81	–		–
MCS11	2	20			-52	–		–
MCS0	3	23			-80	–		–
MCS11	3	20			-51	–		–
MCS0	4	23			-78	–		–
MCS4	4	23			-67	–		–
MCS7	4	23			-60	–		–
MCS8	4	21			-57	–		–
MCS9	4	21			-55	–		–
MCS10	4	20			-51	–		–
MCS11	4	20			-49	–		–

Feature	Benefits
802.11ax (Wi-Fi 6)	The IEEE 802.11ax emerging standard, also known as High-Efficiency-Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It will deliver a better experience in typical environments and more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. 802.11ax is designed to use both the 2.4-Ghz and 5-GHz bands, unlike the 802.11ac standard.
Uplink/downlink OFDMA	OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.
MU‑MIMO technology	Supporting four spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.
BSS coloring	Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the Access Points (APs) and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.
Target wake time	A new power savings mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the AP. This offers significant energy savings for battery-operated devices, up to 3x to 4x compared to 802.11n and 802.11ac.
Cisco Embedded Wireless Controller	The 9115 Wi-Fi 6 access points are available with a built-in controller. The Cisco Embedded Wireless Controller on Catalyst 9100 Access Points provides an easy-to-deploy and manage option that does not require a physical appliance. The control resides on the access point, so there is no added footprint or complexity. And because it uses Cisco Catalyst 9800 Series code, it’s easy to migrate your network as your needs grow. For more details refer to EWC
User Defined Network	A feature available in Cisco DNA Center, allows IT to give end users control of their very own wireless network partition on a shared network. End users can then remotely and securely deploy their devices on this network. Perfect for university dormitories or extended hospital stays, Cisco User Defined Network grants both device security and control, allowing each user to choose who can connect to their network. (Available second half of calendar year 2020.) For more details refer to UDN.
Application Hosting on Catalyst 9100 Access	Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks. Utilizing the USB interface, containerized applications and hardware modules can be deployed to reduce cost and complexity. Adding Cisco DNA Center provides workflows and deployment-wide application lifecycle management.
Multigigabit Ethernet support	Provides uplink speeds of 2.5 Gbps, in addition to 100 Mbps and 1 Gbps. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling.
Bluetooth 5.0	Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.
Apple features	Apple and Cisco have partnered to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies. Using new features in iOS 10, in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications. At the center of the collaboration is a unique handshake between the Cisco WLAN and Apple devices. This handshake enables the Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, the Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. This feature is also known as Fast Lane.