Search

+971 4 388 2219
+971 4 388 2219
+971 4 388 2219

Out of stock

Cisco Catalyst 9117 Series

The Cisco® Catalyst® 9117 Series Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent.

 Specifications

Item

Specification

Part numbers Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas

●  C9117AXI-x: Cisco Catalyst 9117

Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas, with embedded wireless controller

●  C9117AXI-EWC-x: Cisco Catalyst 9117

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.

Software ●  Cisco Unified Wireless Network Software Release 8.9 or later

●  Cisco IOS ® XE Software Release 16.11 or later

Supported wireless LAN controllers ●  Cisco Catalyst 9800 Series Wireless Controllers

●  Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities ●  8×8 MIMO with four spatial streams for 5-GHz band

●  4×4 MIMO with four spatial streams for 2.4-GHz band

●  Maximal Ratio Combining (MRC)

●  20- and 40-MHz channels

●  PHY data rates up to 600 Mbps (40 MHz with 5 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  Cyclic Shift Diversity (CSD) support

802.11ac ●  8×8 downlink MU-MIMO with eight spatial streams

●  MRC

●  802.11ac beamforming

●  20-, 40-, 80, and 160-MHz channels

●  PHY data rates up to 3.5 Gbps at 5 GHz

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  CSD support

●  160 MHz support only on 4-spatial stream

802.11ax ●  8×8 MIMO with eight spatial streams for 5-GHz band

●  4×4 MIMO with four spatial streams for 2.4-GHz band

●  Downlink OFDMA

●  TWT

●  MRC

●  802.11ax beamforming

●  20-, 40-, 80, and 160-MHz channels

●  PHY data rates up to 5 Gbps at 5 GHz

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  CSD support

Integrated antenna ●  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth

●  5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth

Interfaces ●  1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

●  Management console port (RJ-45)

●  USB 2.0 with up to 4.5W (enabled via future software)

Indicators ●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H) ●  Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)

●  Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)

Weight ●  3.02 lb (1.4 kg)
Input power requirements ●  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)

●  Cisco power injector, AIR-PWRINJ6=

●  802.3af PoE

●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.

Power draw 802.3bt Cisco UPOE+ Cisco UPOE Full Feature
  Power source Power type 2.4-GHz
radio
5-GHz
radio
Link speed USB LLDP
802.3bt Cisco

UPOE+, Cisco

UPOE

PoE 4×4 8×8 5 Gbps Y 28.9W
802.3at Full Feature*
Power source Power type 2.4-GHz
radio
5-GHz
radio
Link speed USB LLDP
802.3at PoE 4×4 8×8 5 Gbps N 25.4W
802.3af Reduced Feature
Power source Power type 2.4-GHz
radio
5-GHz
radio
Link speed USB LLDP
802.3af PoE 2×2 2×2 2.5 Gbps N 13.5W
* USB port can be enabled, but the 5-GHz radio will be reduced to 4×4.

Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues

Environmental ●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

●  Operating temperature: 32° to 122°F (0° to 50°C)

●  Operating humidity: 10% to 90% (noncondensing)

●  Operating altitude test: 40˚C, 9843 ft.

System memory ●  2048 MB DRAM

●  1024 MB flash

Warranty Limited lifetime hardware warranty
Available transmit power settings 2.4 GHz

●  23 dBm (200 mW)

●  -6 dBm (0.25 mW)

5 GHz

●  26 dBm (400 mW)

●  -4 dBm (0.4 mW)

Regulatory domains Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.
Compliance standards ●  Safety:

◦    IEC 60950-1

◦    EN 60950-1

◦    AS/NZS 60950.1

◦    UL 60950-1

◦    CAN/CSA-C22.2 No. 60950-1

◦    UL 2043

◦    Class III equipment

●  Emissions:

◦    CISPR 32 (rev. 2015)

◦    EN 55032 (rev. 2012/AC:2013)

◦    EN 55032 (rev. 2015)

◦    EN61000-3-2 (rev. 2014)

◦    EN61000-3-3 (rev. 2013)

◦    KN61000-3-2

◦    KN61000-3-3

◦    AS/NZS CISPR 32 Class B (rev. 2015)

◦    47 CFR FCC Part 15B

◦    ICES-003 (rev. 2016 Issue 6, Class B)

◦    VCCI (V3)

◦    CNS (rev. 13438)

◦    KN-32

◦    TCVN 7189 (rev. 2009)

●  Immunity:

◦    CISPR 24 (rev. 2010)

◦    EN 55024/EN 55035 (rev. 2010)

●  Emissions and immunity:

◦    EN 301 489-1 (v2.1.1 2017-02)

◦    EN 301 489-17 (v3.1.1 2017-02)

◦    QCVN (18:2014)

◦    KN 489-1

◦    KN 489-17

◦    EN 60601 (1-1:2015)

●  Radio:

◦    EN 300 328 (v2.1.1)

◦    EN 301 893 (v2.1.1)

◦    AS/NZS 4268 (rev. 2017)

◦    47 CFR FCC Part 15C, 15.247, 15.407

◦    RSP-100

◦    RSS-GEN

◦    RSS-247

◦    China regulations SRRC

◦    LP0002 (rev 2018.1.10)

◦    Japan Std. 33a, Std. 66, and Std. 71

◦    EMI and susceptibility (Class B)

●  RF safety:

◦    EN 50385 (rev. Aug 2002)

◦    ARPANSA

◦    AS/NZS 2772 (rev. 2016)

◦    EN 62209-1 (rev. 2016)

◦    EN 62209-2 (rev. 2010)

◦    47 CFR Part 1.1310 and 2.1091

◦    RSS-102

●  IEEE standards:

◦    IEEE 802.3

◦    IEEE 802.3ab

◦    IEEE 802.3af/at/bt

◦    IEEE 802.11 a/b/g/n/ac/ax

◦    IEEE 802.11h, 802.11d

●  Security:

◦    802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA

◦    802.1X

◦    Advanced Encryption Standard (AES)

●  Extensible Authentication Protocol (EAP) types:

◦    EAP-Transport Layer Security (TLS)

◦    EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)

◦    Protected EAP (PEAP) v0 or EAP-MSCHAPv2

◦    EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

◦    PEAP v1 or EAP-Generic Token Card (GTC)

◦    EAP-Subscriber Identity Module (SIM)

Datarate/Transmit Power/ Receive sensitivity For more detailed information about Datarate/TX Power/Receive sensitivity
Transmit power and receive sensitivity
    5-GHz radio 2.4-GHz radio
  Spatial streams Total transmit power (dBm) Receive sensitivity (dBm) Total transmit power (dBm) Receive sensitivity (dBm)
802.11/11b
1 Mbps 1 23 -98
11 Mbps 1 23 -89
802.11a/g
6 Mbps 1 23 -95 23 -94
24 Mbps 1 22 -88 22 -87
54 Mbps 1 21 -79 20 -78
802.11n HT20
MCS0 1 23 -95 23 -94
MCS31 4 20 -74 20 -73
802.11n HT40
MCS0 1 23 -93
MCS31 4 20 -72
802.11ac VHT20
MCS0 1 23 -95
MCS8 1 20 -75
MCS9 1 NA NA
MCS0 2 23 -95
MCS8 2 20 -74
MCS9 2 NA NA
MCS0 3 23 -95
MCS9 3 19 -72
MCS0 4 23 -94
MCS9 4 19 -71
802.11ac VHT40
MCS0 1 23 -94
MCS9 1 19 -71
MCS0 2 23 -93
MCS9 2 19 -70
MCS0 3 23 -92
MCS9 3 19 -69
MCS0 4 23 -91
MCS9 4 19 -68
802.11ac VHT80
MCS0 1 23 -91
MCS9 1 19 -67
MCS0 2 23 -90
MCS9 2 19 -66
MCS0 3 23 -89
MCS9 3 19 -65
MCS0 4 23 -88
MCS9 4 19 -64
802.11ac VHT160
MCS0 1 23 -88
MCS9 1 18 -65
MCS0 2 23 -87
MCS9 2 18 -64
MCS0 3 23 -86
MCS9 3 18 -63
MCS0 4 23 -85
MCS9 4 18 -62
802.11ax HE20
MCS0 1 23 -95 23 -94
MCS11 1 18 -68 16 -67
MCS0 2 23 -95 23 -94
MCS11 2 18 -67 16 -66
MCS0 3 23 -95 23 -94
MCS11 3 18 -66 16 -65
MCS0 4 23 -94 23 -93
MCS11 4 18 -65 16 -64
802.11ax HE40
MCS0 1 23 -94    
MCS11 1 18 -65    
MCS0 2 23 -93    
MCS11 2 18 -64    
MCS0 3 23 -92    
MCS11 3 18 -63    
MCS0 4 23 -91    
MCS11 4 18 -62    
802.11ax HE80
MCS0 1 23 -91
MCS11 1 17 -63
MCS0 2 23 -90
MCS11 2 17 -62
MCS0 3 23 -89
MCS11 3 17 -61
MCS0 4 23 -88
MCS11 4 17 -60
802.11ax HE160
MCS0 1 23 -88
MCS11 1 16 -59
MCS0 2 23 -87
MCS11 2 16 -58
MCS0 3 23 -86
MCS11 3 16 -57
MCS0 4 23 -85
MCS11 4 16 -56

  Features and benefits

Feature

Benefits

802.11ax (Wi-Fi 6)

The IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It will deliver a better experience in typical environments and more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. 802.11ax is designed to use both the 2.4-Ghz and 5-GHz bands, unlike the 802.11ac standard.

802.11ac Wave 2 support

Provides a connection rate of up to 3.5 Gbps—significantly higher than rates offered by today’s high-end 802.11ac access points.

OFDMA

OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients only in the downlink direction to reduce overhead and latency.

MU‑MIMO technology

Supporting eight spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.

Target wake time

A new power savings mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the AP. This offers significant energy savings for battery-operated devices, up to 3x to 4x compared to 802.11n and 802.11ac.

Embedded Catalyst Wireless Controller

The 9117 Series Wi-Fi 6 access points are available with a built-in controller. The Cisco Embedded Wireless Controller on Catalyst 9100 Access Points provides an easy-to-deploy and manage option that does not require a physical appliance. The control resides on the access point, so there is no added footprint or complexity. And, because it uses Cisco Catalyst 9800 Series Wireless Controller code, it’s easy to migrate your network as your needs grow. For more details refer EWC.

User Defined Network

A feature available in Cisco DNA Center, allows IT to give end users control of their very own wireless network partition on a shared network. End users can then remotely and securely deploy their devices on this network. Perfect for university dormitories or extended hospital stays, Cisco User Defined Network grants both device security and control, allowing each user to choose who can connect to their network. (Available second half of calendar year 2020.) For more details refer to UDN.

Application Hosting on Catalyst 9100 Access

Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks. Utilizing the USB interface, containerized applications and hardware modules can be deployed to reduce cost and complexity. Adding Cisco DNA Center provides workflows and deployment-wide application lifecycle management.

Multigigabit Ethernet support

Provides uplink speeds of 5 Gbps, in addition to 100 Mbps and 1 Gbps. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling.

Bluetooth 5.0

Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.

Apple features

Apple and Cisco have partnered to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies. Using new features in iOS 10, in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications.

At the center of the collaboration is a unique handshake between the Cisco WLAN and Apple devices. This handshake enables the Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, the Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. This feature is also known as Fast Lane.

Bestsellers

Sold out
This product is already in quote request list.

CISCO - ROUTER ISR 1900 CISCO1921/K9

Cisco ISR 1900 Series, Cisco 1921 Modular Router, 2 GE, 2 EHWIC slots, 512DRAM, IP Base
This product is already in quote request list.
Sold out
This product is already in quote request list.

Cisco Router-ISR4331/K9

ISR 4331 with 3 onboard GE, 2 NIM slots, 1 ISC slot, 1 SM slots, 4 GB Flash Memory default, 4 GB DRAM default Model: Cisco 4000 Router ISR4331 (3GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) Brand: Cisco
This product is already in quote request list.
Sold out
This product is already in quote request list.

Cisco FPR2110-NGFW-K9

Cisco Firepower 2110 NGFW Appliance
This product is already in quote request list.
Sold out
This product is already in quote request list.

CISCO-CP-7942G 7900 IP PHONE

Cisco 7900 Unified IP Phone
This product is already in quote request list.
Sold out
This product is already in quote request list.

CISCO NETWORK MODULE FOR 3850 SERIES SWITCHES

Cisco 3850 Series Network Module C3850-NM-2-40G 2 x 40GE Network Module
This product is already in quote request list.
Sold out
This product is already in quote request list.

CISCO WS-C2960S-48LPD-L CATALYST 2960-S SERIES GE SWITCH

Cisco Catalyst 2960S-48LPD Layer 2 - Gigabit Ethernet Switch - 48 x 10/100/1000 PoE Ports - 370W - 2 x 10G SFP - LAN Base - Managed
This product is already in quote request list.
Sold out
This product is already in quote request list.

Cisco FPR2110-NGFW-K9

Cisco Firepower 2110 NGFW Appliance
This product is already in quote request list.

Product has been added to your cart