.svg)
AIR-OEAP1810-T-K9 Overview
AIR-OEAP1810-T-K9, providing T Regulatory Domain, is one of the Cisco Aironet 1810 Series OfficeExtend Access Points. The 1810 Series offer a highly secure enterprise wireless and wired connection to the home, micro-branch, or other types of remote sites. The 1810 Series extends the corporate network to teleworkers, mobile workers and even micro-sites. The access points connect to the home or site broadband Internet access and establish a highly secure tunnel to the corporate network. This tunnel allows remote employees access to data, voice, video and cloud services for a mobility experience consistent with that at the corporate office. The 1810 Series supports highly secure access to corporate data and personal connectivity for teleworkers’ home devices, with segmented home traffic.
Quick Specs
Table 1 shows the quick specs of AIR-OEAP1810-T-K9.
| Product Code | AIR-OEAP1810-T-K9 |
| Interfaces |
|
| Features | 2×2 single-user/multiuser MIMO with two spatial streams
Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) support |
| Regulatory Domain | T (T regulatory domain):
(excludes 5.600 to 5.640 GHz)
|
| Integrated antennas |
|
| System |
|
| Dimensions (W x L x H) | 165 x 114 x 41 mm (Access point without mounting bracket)) |
| Weight | 560g (Access point without mounting bracket or any other accessories) |
Product Details
Note:
| ? | The Face of AP | ? | 48V DC power port |
| ? | The Left side of AP | ? | Kensington lock slot |
Note:
| ? | Console port | ? | LAN port 2 |
| ? | Passive Pass-Through port | ? | PSE / LAN port 1 |
| ? | LAN port 3 |
PSE / LAN port 1 provides 802.3af/at Power Sourcing Equipment (PSE) PoE-Out power on the LAN 1 Ethernet interface. With 802.3at input the PoE-Out is 6.95W (Class 2).With DC input the PoE-Out is 12.95W (Class 0).
Note:
| ? | The AP |
| ? | The cradle kit |
| ? | Mounting the AP in the Cradle |
Cisco Aironet OEAP1810 series access points can be mounted on a table or horizontal surface, using the AIR-OEAP1810-CRD= cradle kit. This kit is shipped with the access point as standard and includes a back cover and an RJ-45 jumper cable. It is also separately available from Cisco as a spare.
Note:
| ? | AP Status LED indication when
AP is mounted in the cradle |
? | LAN 3 port |
| ? | PSE / LAN 1 port | ? | WAN port |
| ? | LAN 2 port |
Compare to Similar Items
Table 2 shows the comparison between two AP.
| Models | AIR-OEAP1810-T-K9 | AIR-OEAP1810-Z-K9 |
| Interfaces |
|
|
| Regulatory Domain | T (T regulatory domain):
(excludes 5.600 to 5.640 GHz)
|
Z (Z regulatory domain):
(excludes 5.600 to 5.640 GHz)
|
