Buy A+ Server 2123BT-HNR(Complete System Only) in Dubai, UAE, KSA & Russia

A+ Server 2123BT-HNR(Complete System Only)

Key Features

– Compute Intensive Application
– HPC, Data Center, Enterprise
Server
– Hyperscale / Hyperconverged

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1.Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)

2.2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs (7001 Processors)
4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required + 7002 Processors)

3.2 PCI-E 3.0 x16 (LP) slot; 1 SIOM card support (flexible networking)
Note: must bundle with Network card

4.Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
key (SFT-OOB-LIC) included
for OOB BIOS management

5.6 Hot-swap 2.5″ NVMe drive bays
M.2 Interface: 1 SATA/PCI-E 3.0 x4
M.2 Form Factor: 2280, 22110
M.2 Key: M-key

6.Video via Aspeed AST2500 BMC

7.2600W Redundant Power Supplies
Titanium Level (96%)
(Full redundancy based on configuration and application load)

Add to quote

Product SKUs – Discontinued SKU (EOL). Please contact sales-rep for alternative options.

AS -2123BT-HNR	A+ Server 2123BT-HNR (Black)

Motherboard (per Node)

Super H11DST-B

Processor/Chipset (per Node)

CPU	Dual AMD EPYC™ 7001/7002* series Processors (* Board revision 2.x required) Socket SP3 Supports CPU TDP 200W / cTDP up to 200W**
Cores	Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)


Note	** Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

System Memory (per Node)

Memory Capacity	16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type	DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
Memory Sizes	8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (* Board revision 2.x required + 7002 processors)
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices (per Node)

Chipset	System on Chip
Network	Must bundle with at least one SIOM network card
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video	ASPEED AST2500 BMC

Input / Output (per Node)

LAN	Provided via SIOM (optional) 1 RJ45 Dedicated IPMI LAN port
USB	2 USB 3.0 ports (rear)
Video	1 VGA port
DOM	1 SuperDOM (Disk on Module) port
Others	1 COM port (header) 1 TPM 2.0 header

System BIOS (per Node)

BIOS Type	AMI 128Mb SPI Flash ROM

Management (per Node)

Software	IPMI 2.0 KVM with dedicated LAN SSM, SUM SuperDoctor® 5 Watch Dog
Power Configurations	ACPI / APM Power Management

Chassis

Form Factor	2U Rackmount
Model	CSE-217BHQ+-R2K60BP

Dimensions and Weight

Width	17.68″ (449mm)
Height	3.47″ (88mm)
Depth	28.75″ (730mm)
Package	24.33″ (618mm) H x 9.57″ (243mm) W x 45.08″ (1145mm) D
Weight	Gross Weight: 85 lbs (38.6 kg) Net Weight: 54.5 lbs (24.7 kg)
Available Colors	Black

Front Panel (per Node)

Buttons	Power On/Off button UID button
LEDs	Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED

Expansion Slots (per Node)

PCI-Express	2 PCI-E 3.0 (x16) Low-profile slots 1 SIOM card support (must bundle with network card)
M.2	Interface: 1 SATA/PCI-E 3.0 x4 Form Factor: 2280, 22110 Key: M-key

Drive Bays (per Node)

Hot-swap	6 Hot-swap 2.5″ NVMe drive bays Note: NVMe Gen4 drives may only operate at Gen3 speed

System Cooling

Fans	4 Heavy duty 8cm PWM fans

AC/DC240V Input Redundant Power Supply
2600W Redundant Power Supplies with PMBus
Total Output Power	2600W
Dimension (W x H x L)	45 x 40 x 480 mm
Input	208-240Vac/15-12.5A / 50-60Hz 220-240Vdc/13.5-12.5A (CQC only)
+12V	Max: 216.6A / Min: 0A
12Vsb	Max: 4.5A / Min: 0A
Output Type	Gold Finger (4HP+2LP-20S output connector)
Certification	Titanium Level [ Cert. in progress ]

Operating Environment

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 30°C (50°F ~ 86°F) * Support for operating above 30°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details. Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)