Buy SuperServer 6028BT-HNC0R+ (Complete System Only) in Dubai, UAE, KSA & Russia

SuperServer 6028BT-HNC0R+ (Complete System Only)

Key Features

– Hyperscale and Hyperconverged
Solutions
– Compute Intensive Application
– HPC, Data Center
– Enterprise Server

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4^†/ v3 family; QPI up to 9.6GT/s

2. Up to 3TB^† ECC 3DS LRDIMM , up to
DDR4- 2400^†MHz ; 24 DIMM slots

3. 2 PCI-E 3.0 x16 (LP) slots; 1 SIOM
card support (flexible networking)
Note: must bundle with Network card

4. 3 Hot-swap 3.5″ NVMe/SAS3 drive bays

5. SAS3 support via Broadcom 3008;
IT mode

6. IPMI 2.0 + KVM with dedicated LAN

7. Video via Aspeed AST2400 BMC

8. 4 heavy duty 8cm PWM fans with
air shroud

9. 2200W Redundant Power Supplies
Titanium Level (96%)

10. 2 M.2 SATA3 or NVMe support

Processor/Cache

CPU	Intel® Xeon® processor E5-2600 v4^†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011)
Cores / Cache	Up to 22 Cores^† / Up to 55MB^† Cache
System Bus	QPI up to 9.6 GT/s
Note	^† BIOS version 2.0 or above is required
Note	* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory

Memory Capacity	24x 288-pin DDR4 DIMM slots Up to 3TB^† ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type	2400^†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors

On-Board Devices (per Node)

Chipset	Intel® C612 chipset
SAS	SAS3 (12Gbps) via Broadcom 3008; IT mode
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network	Must bundle with at least one SIOM network card
Video	ASPEED AST2400 BMC

Input / Output (per Node)

SAS	3 SAS3 (12Gbps) ports
LAN	1 RJ45 Dedicated IPMI LAN port
USB	2 USB 3.0 ports (rear)
Video	1 VGA port
Others	M.2 and SATA DOM for boot drive only

Dimensions and Weight

Width	17.6″ (447mm)
Height	3.47″ (88mm)
Depth	30.5″ (775mm)
Package	9.76″ (H) x 24.65″ (W) x 45.28″ (D)
Weight	Gross Weight: 86.5 lbs (39.24 kg) Net Weight: 56 lbs (25.4 kg)
Available Colors	Black

Front Panel

Buttons	Power On/Off button UID button
LEDs	Power status LED HDD activity LED 2 Network activity LEDs Universal Information (UID) LED

Expansion Slots (per Node)

PCI-Express	2 PCI-E 3.0 (x16) Low-profile slots 1 SIOM card (must bundle with network card)

Drive Bays (per Node)

Hot-swap	3 Hot-swap 3.5″ NVMe/SAS3 drive bays Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.

System Cooling

Fans	4 heavy duty 8cm PWM fans with air shroud

Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power	1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)	45 x 40 x 480 mm
Input	1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only)
+12V	Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb	Max: 2.1A / Min: 0A
Output Type	Gold Finger
Certification	Titanium Level [ Test Report ]

System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS

Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)