Buy SuperServer 6028TR-HTR in Dubai, UAE, KSA & Russia

SuperServer 6028TR-HTR

Key Features

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4^†/ v3 family; QPI up to 9.6GT/s

2. Up to 1TB^† ECC 3DS LRDIMM , up to
DDR4- 2400^†MHz ; 8x DIMM slots

3. 1x PCI-E 3.0 (x16) low-profile slot

4. Intel® i350 Dual port GbE LAN

5. 3x 3.5″ Hot-swap SATA3
drive bays

6. 2x SATA DOM

7. 1600W Redundant Power Supplies
Titanium Level (96%)

Processor/Cache (per Node)

CPU	Intel® Xeon® processor E5-2600 v4^†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011)
Cores / Cache	Up to 22 Cores^† / Up to 55MB^† Cache
System Bus	QPI up to 9.6 GT/s
Note	^† BIOS version 2.0 or above is required
Note	* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory (per Node)

Memory Capacity	8x 288-pin DDR4 DIMM slots Up to 1TB^† ECC 3DS LRDIMM, 256GB ECC RDIMM
Memory Type	2400^†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors

On-Board Devices (per Node)

Chipset	Intel® C612 chipset
SATA	SATA3 (6Gbps) with RAID 0, 1, 5
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Video	ASPEED AST2400 BMC

Input / Output (per Node)

Serial ATA	8x SATA3 (6Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports (rear)
Video	1x VGA port
Serial Port / Header	1x RS232

Dimensions and Weight

Width	17.25″ (438mm)
Height	3.47″ (88mm)
Depth	28.5″ (724mm)
Package	26.4″ (H) x 11.2″ (W) x 39.8″ (D)
Weight	Gross Weight: 85 lbs (38.6kg) Net Weight: 54.5 lbs (24.7 kg)
Available Colors	Black

Front Panel

Buttons	Power On/Off button System Reset button UID button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED

Expansion Slots (per Node)

PCI-Express	1x PCI-E 3.0 (x16) Low-profile slot 1x PCI-E 3.0 (x8) connectors for SMCI Add-on Cards

Drive Bays (per Node)

Hot-swap	3x 3.5″ Hot-swap SATA3 HDD trays Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.

System Cooling

Fans	4x 8cm heavy duty PWM fans with optimal fan speed control

Power Supply (76mm Width)
1600W 1U Redundant Power Supplies with PMBus
Total Output Power	800W: 100 – 140Vac 1600W: 180 – 240Vac
Dimension (W x H x L)	76 x 40.4 x 336 mm
Input	100-140Vac / 10-7A / 50-60Hz 180-240Vac / 11-8A / 50-60Hz
+12V	Max: 67A / Min: 0A (100-140Vac) Max: 133A / Min: 0A (180-240Vac)
+5Vsb	Max: 1A / Min: 0A
Output Type	27 Pairs Gold Finger Connector
Certification	Titanium Level [ Test Report ]

System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI

Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)